PROGRESS 8/3/2019

Progress the last week of so. Almost finished the Concourse for Penn Station. Need to test fit it Sunday and take some photos. Also the Dam is installed and some weathering done. Poured first coat of "water" to make sure everything is sealed. Need a couple more coats and then have to deal with where the water flows over the dam. Also finished framing the engine house (John Allen Memorial Engine House) and just cut the roof on my laser. Roof will have eight clear glass windows so you can see inside and four smoke stacks aligned over where a steam engine's stack would be located. Have three of the windows and the other five are hopefully in the mail. Also the shingles I laser cut out of thin cardboard for the roof and will be installed when the five windows arrive next week I hope. Still have to complete the power plant that the dam feeds. So some photos should be forthcoming.

3D PRINTING FOR MODEL RAILROADER LINKS

3D Printing for Model Railroaders at Amazon

Article in March 2018 of Model Railroad Hobbyist E Magazine

3D Printing at Model Railroader.com

3D Model Railroad Models to print at Yeggi

Model Railroad Info Guy

Train Models at Shapeways.com3D Printing of HO Water Tower on YouTubeModel Buildings and Structures on Thingiverse.com

Where I Purchased my printer

Most of the rust colored parts on my coaling tower we 3D printed.  The clutches were made out of styrene. The chain was from Michell's .

THANKS TO ALL WHOM ATTENDED MY CLINIC AT THE MINI CON!