Here are photos of three boards I had made for ease in building and controlling signals as well as wiring my CTC board.
 |
| Signal Control Circuit. 8 bits via CAT5 cable controls 12 LEDs in four signal heads. Can therefore control an OS section with a two three color signal heads for each route and one two head three color signal for the point end of the turnout. |
 |
| Breakout board route eight wires from a CAT5 cable to eight screw terminals. Many uses when using CAT5 rather than single wires or phone cables. |
 |
| Same breakout board but with Molex connector which allows connection to DIN24, DIN32, DOUT24, DOUT32, or SMINI boards. Eliminates building molex connectors and crimping molex pins. |
